News

New KWR X-Ray Wing And Body Support Kit Explained

New KWR X-Ray Wing And Body Support Kit Explained

In this video we explain how the new KWR X-Ray Wing And Body Support Kit works and how it might be an alternative for those of you who don't want to use our standard rear body support. The innovative two part design lets you use just the wing support, or add the body stiffeners depending on your preference. As you can see, the stiffeners prevent the body from flexing under load and are also beneficial in the event of a hit from behind.  

繼續閱讀 →


KWR Diff Tool Demonstration

KWR Diff Tool Demonstration

In this video John demonstrates how to use the KWR Diff Tool which fits onto most commonly used Diff Checkers. The tool enables you to check your diff while it is out of the car.      

繼續閱讀 →


KWR Engineering Hits The Veledrome

KWR Engineering Hits The Veledrome

On Saturday 23 January 2021, we headed down to Coburg Veledrome in Melbourne's northern suburbs to test the KWR Engineering X-Ray RX8E.3 equipped with all the KWR hop ups including base plate and receiver box. After a little bit of getting used to the 45 degree banked corners (which have a tendency to pull the car either up or down) and navigating the traffic, it was a lot of fun.  Running gear was as follows: X-Ray RX8E.3 chassis 2020 Hobbywing Max8 Plus ESC - no boost Hobbywing 2600kV motor - timing 30 degrees Stock gearing MKS servo 2 x Sunpadow...

繼續閱讀 →