KWR 36AU Pre Glued High Performance Tyre Set
KWR 36AU Pre Glued High Performance Tyre Set

KWR 36AU Pre Glued High Performance Tyre Set

通常価格 $42.00 AUD $0.00 AUD 単価 あたり
税込

Introducing our very first KWR Engineering pre-glued tyre set which has been configured especially for Australian conditions - outdoor asphalt and typically low-medium grip.

Following extensive testing on a range of surfaces from smooth and rough asphalt to Boral Coat, the tyres have performed seamlessly with significantly longer life than other currently available options. 

You will notice the tyres generate exceptional steering and rear grip resulting in blisteringly fast lap times. These will become the go to tyre on almost every surface.

Our recommended preparation is as follows:

  • First use:
    • Remove the center bead (which is minimal) using a tyre bead remover or tyre sander.
    • If you do not want to do this, just be aware that it will take 5 or so laps to wear this off for optimal performance.
    • We recommend cleaning the tyre with Dominate. Just spray onto a Chucks Wipe or microfibre cloth (not Shop Towel) and apply to each tyre. Ideally apply while spinning the tyre on a tyre sander.
    • We recommend then applying ATS Tyre Additive and warming for 5 minutes at 70 degrees before hitting the track.
  • Subsequent uses:
    • For optimum performance, we recommend a light sand.
    • If you don't want to sand the tyre to fully maximise its life, we would recommend at least using a tyre sander to apply the Dominate as described above.
    • You should see the tyre foam up with white bubbles. Keep the cloth in contact with the tyre until these bubbles disappear.
    • We recommend then applying ATS Tyre Additive and warming for 5 minutes at 70 degrees before hitting the track.
  • Storage:
    • We recommend storing the tyres in the zip lock back they came in after use.
    • Its up to you whether you clean them prior to storage.

 

 

Includes:

  • 4 x pre-glued 36AU tyres on a dish rim.

この商品をシェアする