KWR Wheel Arch Marker (1/12th)
The KWR Wheel Arch Marker is specially designed to mark the perfect wheel arch for cutting every time.
The top section is 3mm thick and 3D printed in high quality PLA plastic. The bottom section is designed to match the contour of a 1/12th scale foam tire and allows the top section to slot into it.
Ideal to take with you when travelling as it can be stored flat.
Recommended procedure for marking:
- Trim the body to the cut line.
- Mount the body on the car with the wheels on and the correct ride height set.
- Assemble the two piece KWR Wheel Arch Marker and slide it in under the tire that you wish to mark.
- Use a sharpie or other form of permanent marker to trace the wheel arch radius out.
- Cur the wheel arch out with a pair of curved scissors.
- 1 x KWR Two Piece Wheel Arch Marker